Commercial Roof Replacement Across Texas & Louisiana
Planned around your building, budget and operations.
★★★★★ 4.9·1,400+ Google reviews·20,000+ roofs replaced
Serving Texas & Louisiana Since 1983
M&M replaces aging, storm-damaged and repeatedly failing commercial roofs throughout Texas and Louisiana. We evaluate the existing roof assembly, explain repair, restoration and replacement options, and develop a project-specific plan for the selected roofing system, building access and operational requirements.
Licensed, insured & bonded
Get a Free Commercial Assessment
No cost, no obligation. We will contact you within one business day.
Free assessment · No obligation · Serving Texas & Louisiana since 1983
GAF President's Club
GAF Master Elite
Google 4.9-star rating, 1,400+ reviews
Angi Super Service Award
BBB Accredited A+ Rating
When is commercial roof replacement necessary?
Commercial roof replacement is generally considered when deterioration is widespread, insulation or decking is extensively damaged, repairs are no longer dependable, or the existing system cannot meet the building's long-term performance requirements. The decision should follow an inspection of the entire roof assembly, not its age alone.
Recurring leaks across multiple areas
Leaks in several unrelated locations usually point to system-wide deterioration rather than a single failed detail.
Widespread wet insulation or deck deterioration
Once moisture has spread through large sections of insulation, or the deck has deteriorated, removing and rebuilding the assembly may be required.
Extensive seam, flashing or membrane failure
When failures appear across much of the roof rather than at isolated points, individual repairs become harder to justify.
Repairs that no longer hold
If repaired areas keep failing, or new leaks appear soon after each repair, the roof may no longer be a dependable base for further work.
Severe storm or wind damage
Major wind uplift, hail impact or debris damage across large areas of the roof can make replacement the more practical path.
An aging system that does not fit the owner's plans
An older roof may still be serviceable, but not suited to a long hold, a change in use, new rooftop equipment or energy-code upgrades.
Repair, restore or replace?
Replacement is one of three paths. The right one depends on the condition of the whole roof assembly.
| Option | Best suited to |
|---|---|
| Repair | Isolated damage with a serviceable surrounding roof system |
| Restoration | A generally sound roof that can qualify for a coating or restoration system |
| Full replacement | Widespread deterioration, extensive moisture, damaged decking or an unsuitable existing assembly |
Considering a coating? Roof coatings are a restoration alternative to replacement, not a replacement system.
Not sure replacement is the answer?
What a commercial roof replacement may include
The scope is defined by the existing conditions. Not every replacement includes every item below.
Existing roof evaluation
- Existing membrane or roof covering
- Insulation and moisture conditions
- Deck condition
- Drainage and slope
- Flashing and penetrations
- Rooftop equipment and access constraints
Removal and preparation
- Complete tear-off or approved recover preparation
- Disposal of removed materials
- Localized or extensive deck repairs
- Insulation replacement or upgrades
- Drainage or tapered-insulation modifications
New roof installation
- Selected roofing system
- Flashing and penetration details
- Perimeter, curb and transition work
- Drainage components
- Applicable system accessories
Documentation and closeout
- Project photographs
- Final walkthrough
- Warranty documentation
- Manufacturer registration when applicable
- Maintenance and inspection recommendations
Commercial roofing systems for replacement
Each system suits different roof types and operating conditions. Detailed specifications live on each system page.
TPO roofing
Applicable roof types: flat and low-slope roofs. Advantages: heat-welded seams and reflective membrane options. Limitations: quality depends on thickness and detailing, and the membrane can be punctured by traffic. Maintenance: inspect seams and penetrations and keep drains clear.
Modified bitumen
Applicable roof types: low-slope roofs suited to a multi-ply asphalt assembly. Advantages: multi-ply redundancy and good tolerance for foot traffic. Limitations: heat-applied methods do not suit every occupied property. Maintenance: check laps, flashing and surfacing, and fix blisters early.
Metal roofing
Applicable roof types: low- or steep-slope buildings needing a durable metal assembly. Advantages: durable and non-combustible, with concealed-fastener options. Limitations: higher upfront cost, and expansion and panel-end details matter. Maintenance: inspect fasteners, sealants and cut edges.
Steep-slope roofing
Applicable roof types: pitched roofs on churches, multi-family and some office buildings. Advantages: a familiar look, and shingles can be replaced individually. Limitations: needs adequate slope and is not for flat areas. Maintenance: check for lifted shingles and keep gutters and valleys clear.
Considering a coating? Roof coatings are a restoration alternative to replacement, not a replacement system. Our roof coatings page explains when a roof qualifies.
What affects commercial roof replacement cost?
M&M prices each commercial replacement after inspecting the existing assembly, because two roofs of the same size can require very different removal, insulation, drainage and access work. The proposal should separate the primary scope, identified repairs, options and allowances clearly enough for ownership to compare the available paths.
Roof area and existing layers
Total roof area and the number and type of existing roof layers set the base removal and disposal scope.
Tear-off versus recover
A full tear-off versus an approved recover changes labor, material and disposal costs.
Wet insulation or damaged deck
Moisture-damaged insulation or decking adds removal and replacement work beyond the membrane.
System and requirements
The selected roofing system, insulation and energy-code requirements and warranty requirements shape materials and details.
Access and rooftop equipment
Building height, site access, rooftop equipment and penetrations affect staging and detailing.
Drainage and phasing
Drainage modifications and phasing around occupied areas affect sequencing and scope.
Replacement process and business-continuity planning
Five stages, from the first inspection to warranty closeout. Commercial work is normally performed during standard operating hours, and project phasing depends on the building, scope, access and operational requirements.
01
Assessment and existing-condition documentation
Inspect the roof assembly, moisture conditions, drainage, deck and operational constraints.
02
System options and written scope
Compare appropriate replacement or recover options and explain the factors behind the recommendation.
03
Preconstruction planning
Establish access, staging, protection, sequencing, communication and applicable project documentation.
04
Scheduled and phased installation
Coordinate work areas to help maintain safe building access and minimize avoidable disruption.
05
Inspection, closeout and warranty documentation
Complete the final walkthrough, photographs, warranty documents and maintenance recommendations.
Commercial replacement documentation and warranties
The records ownership, lenders and risk managers typically need before, during and after a replacement. Documents provided depend on the project scope. Manufacturer warranty eligibility and terms depend on the selected system and installation, and applicable warranties and M&M workmanship terms are identified in each proposal.
Before the work
- Written scope and proposal
- Product and system specifications
- Certificate of insurance when requested
- Project schedule or phasing plan
During and after the work
- Change-order documentation
- Progress and completion photographs
- Final walkthrough or punch list
- Manufacturer warranty when applicable
- M&M workmanship-warranty terms
- Recommended inspection and maintenance schedule
We're trusted by our clients
★ 4.9 average · 1,400+ Google reviews
The work was completed in one day and Greg came out to make sure the crew was doing everything the way he wanted. The whole process was really great. Very professional from start to finish. Thanks M&M.
Sam went above and beyond to ensure that all our questions were answered, and our concerns addressed, making the entire process smooth and stress-free.
Six offices across Texas & Louisiana
Wherever your building is in our service area, an M&M office is never far away.
Commercial roof replacement FAQs
How do I know whether my commercial roof needs replacement?
An inspection of the full roof assembly is the reliable way to know. Replacement is generally considered when leaks occur across several areas, insulation or decking is extensively damaged, failures are widespread, or repairs no longer hold. Age alone does not decide it: a roof past its expected life may still be repairable or restorable.
Can a commercial roof be recovered instead of torn off?
Sometimes. Recover eligibility depends on the existing assembly, moisture conditions, the number of existing layers, applicable code requirements and the manufacturer's specifications. Wet insulation or a damaged deck generally needs to be removed rather than covered.
How much does commercial roof replacement cost in Texas and Louisiana?
It depends on the specific roof. Area, system, tear-off versus recover, existing layers, wet insulation, deck repairs, drainage changes, rooftop equipment, access and phasing all affect the price. M&M prices each replacement after inspecting the existing assembly.
Which commercial roofing system is best for my building?
The right system depends on roof slope, building use, rooftop traffic, budget, energy requirements and how long the owner plans to hold the property. M&M compares the applicable options in the written scope rather than recommending one system for every building.
Can the building remain occupied during replacement?
In most cases, yes. Commercial work is normally performed during standard operating hours, and work areas are sequenced to help maintain safe building access. Project phasing depends on the building, scope, access and operational requirements.
How long does a commercial roof replacement take?
Project duration depends on roof size, system, tear-off requirements, deck condition, access, weather and phasing. M&M establishes the anticipated schedule after inspecting the property and defining the scope.
What warranties are available on a commercial roof replacement?
Commercial replacements may include a manufacturer warranty, when the system and installation qualify, and M&M workmanship terms. Coverage varies by system and project, and the applicable warranties are identified in the proposal.
Plan Your Commercial Roof Replacement
Start with an assessment of the existing roof assembly. You will get a written scope that compares the options that apply to your building, with options and allowances separated. Not sure replacement is necessary? We will say so.
★ 4.91,400+ Google reviews20,000+ roofs replaced