Roofing Systems for Homes and Commercial Buildings
★★★★★ 4.9·1,400+ Google reviews·20,000+ roofs replaced
Serving Texas & Louisiana Since 1983
M&M installs, repairs, maintains and restores roofing systems for homes, multi-family properties and commercial buildings: steep-slope, low-slope and restoration.
$0 down financing available
Get My Free Estimate
No cost, no obligation. We will contact you to schedule.
Free estimate · No obligation · Serving Texas & Louisiana since 1983
GAF President's Club
GAF Master Elite
Google 4.9-star rating, 1,400+ reviews
Angi Super Service Award
BBB Accredited A+ Rating
Start with the building, not the material
Pick the path that matches your property. Each one jumps to the systems that usually apply.
A roofing system is the full assembly (deck, underlayment or insulation, the surface layer, flashing and drainage), not just the material you see. The right one depends on roof slope, building use, existing conditions, climate exposure and budget, not on which material is most popular.
- Roofing systems for homes: for homeowners comparing asphalt shingles, metal roofing and tile roofing.
- Commercial and low-slope buildings: for property owners evaluating flat-roof assemblies, TPO, EPDM, modified bitumen and applicable metal systems.
- Restore an existing roof: for qualifying roofs that may benefit from a coating or restoration system instead of immediate replacement.
Steep-slope roofing systems
Systems that shed water by gravity and are part of how the building looks from the street.
Asphalt shingles
The most common steep-slope system on homes and multi-family buildings. Architectural profiles add depth; impact-rated and high-wind lines are available. What to weigh: appearance, wind rating, impact resistance and warranty.
Tile roofing
Clay and concrete tile for homes framed to carry the load. The tile is durable; the underlayment beneath it does most of the waterproofing. What to weigh: structural weight, underlayment, breakage and architectural appearance.
Metal roofing
Standing seam and exposed-fastener panels for homes, metal buildings and some low-slope commercial roofs. What to weigh: panel profile, fastening method, finish coating, thermal expansion and lifecycle.
Flat and low-slope roofing systems
Flat roofing is a roof configuration, not one material. Depending on the building and the existing roof, a low-slope assembly may use TPO, EPDM, modified bitumen, metal or another approved system. Drainage, penetrations and the complete assembly matter as much as the membrane.
TPO roofing
A reflective single-ply membrane with heat-welded seams, common on warehouses, retail and offices. What to weigh: membrane thickness, attachment, seams and insulation.
Modified bitumen roofing
A multi-layer, asphalt-based system for commercial and multi-family low-slope roofs. What to weigh: installation method, surfacing, seams and existing conditions.
Commercial metal roofing
Structural panels for metal buildings and some low-slope commercial roofs. What to weigh: fastening, expansion, coating and detailing at transitions.
Roof coatings
A fluid-applied layer over a qualifying existing roof, used to restore rather than replace. What to weigh: existing moisture, adhesion and drainage.
Restore a qualifying roof, not every roof
A roof coating is a fluid-applied layer (silicone, acrylic or another elastomeric product) applied over an existing roof that is still sound. It can add weatherproofing and reflectivity and extend service life. It is a restoration product, not a replacement for every roof system.
A coating is often a candidate when the insulation and deck are dry, the surface accepts adhesion, water drains without long ponding and damage is limited and repairable.
It is usually not appropriate when moisture is trapped in the assembly, the deck or insulation has failed, drainage problems need re-sloping or damage is widespread.
Coating is not automatically cheaper or faster than replacement. Eligibility comes from testing, not from the age of the roof.
Roofing systems compared
A starting point for what to look into next, not a specification. Cost and lifespan depend on the assembly, tear-off, manufacturer and maintenance, so we do not publish universal figures.
| System | Common application | Roof profile | Primary strengths | Important considerations |
|---|---|---|---|---|
| Asphalt shingles | Homes and multi-family | Steep slope | Familiar appearance, broad options | Wind rating, impact rating, ventilation |
| Metal | Residential and commercial | Steep or low slope | Durability, varied profiles | Attachment, expansion, coating and details |
| Tile | Residential and architectural properties | Steep slope | Appearance and material durability | Weight, underlayment and breakage |
| TPO | Commercial buildings | Low slope | Reflectivity and welded seams | Thickness, attachment and puncture exposure |
| EPDM | Commercial and low-slope buildings | Low slope | Flexibility and established use | Seams, attachment and heat absorption |
| Modified bitumen | Commercial and multi-family | Low slope | Multi-layer construction | Installation method and surface condition |
| Roof coatings | Qualifying existing roofs | Primarily low slope | Restoration and reflectivity | Existing moisture, adhesion and drainage |
Seven things we look at before naming a system
We do not recommend a roof we have not seen. These are the factors an assessment covers. See it in person before deciding.
01
Building and property type
Home, multi-family community, retail center, warehouse, church or other facility.
02
Roof slope and geometry
Slope determines which systems and installation methods are appropriate.
03
Existing assembly and condition
Decking, insulation, moisture, prior layers and structural support.
04
Gulf Coast exposure
Heat, UV, humidity, heavy rain, high winds and tropical weather shape detailing and product choice.
05
Appearance and property rules
Architecture, HOA restrictions and visible roof areas.
06
Lifecycle priorities
Initial investment, maintenance, repairability, energy performance and how long you will own it.
07
Warranty requirements
Coverage depends on the complete assembly, approved products, installation and upkeep.
Services available across roofing systems
System pages explain the materials. Service pages explain what we do. A system page covers the material; our repair and replacement pages cover how we diagnose and fix problems across every system.
Residential services
Roof inspection, roof repair, roof replacement and storm-damage assessment for homes.
Commercial services
Roof inspection, roof repair, roof replacement, restoration and coatings, and storm-damage assessment for commercial buildings.
Storm-damage assessment
Assessment and repair planning after hail, wind and other storm damage.
Roof inspection
Start with an inspection so the right system and service are chosen from what we see.
We're trusted by our clients
★ 4.9 average · 1,400+ Google reviews
The work was completed in one day and Greg came out to make sure the crew was doing everything the way he wanted. The whole process was really great. Very professional from start to finish. Thanks M&M.
Sam went above and beyond to ensure that all our questions were answered, and our concerns addressed, making the entire process smooth and stress-free.
Six offices across Texas & Louisiana
Wherever you are in our service area, an M&M office is never far away.
Roofing systems FAQs
What roofing systems does M&M install?
On steep-slope roofs: asphalt shingles, tile and metal. On low-slope roofs: TPO, modified bitumen, metal and other approved assemblies. We also restore qualifying roofs with coatings.
How do I know which roofing system is right for my property?
It comes down to slope, building use, the existing assembly, local exposure, appearance requirements and how long you plan to own the property. An on-site assessment is the reliable way to narrow it down. We will not name a system without seeing the roof.
What is the difference between steep-slope and flat roofing?
Steep-slope roofs shed water with overlapping materials like shingles, tile or metal panels. "Flat" roofs are actually low-slope and rely on a continuous membrane or multi-layer assembly plus drainage.
Is metal roofing appropriate for homes and commercial buildings?
Both, with different profiles. Homes often use standing seam or metal shingles; metal buildings and some low-slope commercial roofs use structural panels. Fastening, expansion and detailing change with the application.
Can an existing commercial roof be coated instead of replaced?
Sometimes. A coating needs a dry assembly, a surface it can bond to, workable drainage and limited damage. We test for moisture and adhesion first and tell you plainly if replacement is the better call.
Does M&M repair and maintain roofs it did not install?
Yes. Most repair and maintenance work we do is on roofs someone else installed. We will note anything that could affect an existing manufacturer warranty before we start.
Get a system recommendation for your property
Tell us what you have and what is going on. We will schedule an assessment and recommend a system after we have seen the roof, not from a dropdown.
★ 4.91,400+ Google reviews20,000+ roofs replaced