Roofing Systems for Homes and Commercial Buildings

★★★★★ 4.91,400+ Google reviews20,000+ roofs replaced

Serving Texas & Louisiana Since 1983

M&M installs, repairs, maintains and restores roofing systems for homes, multi-family properties and commercial buildings: steep-slope, low-slope and restoration.

$0 down financing available

Get My Free Estimate

No cost, no obligation. We will contact you to schedule.

This field is for validation purposes and should be left unchanged.

Free estimate · No obligation · Serving Texas & Louisiana since 1983

Privacy Policy · Terms & Conditions

GAF President's Club

GAF Master Elite

Google 4.9-star rating, 1,400+ reviews

Angi Super Service Award

BBB Accredited A+ Rating

Residential home with a newly installed roof

Start with the building, not the material

Pick the path that matches your property. Each one jumps to the systems that usually apply.

A roofing system is the full assembly (deck, underlayment or insulation, the surface layer, flashing and drainage), not just the material you see. The right one depends on roof slope, building use, existing conditions, climate exposure and budget, not on which material is most popular.

  • Roofing systems for homes: for homeowners comparing asphalt shingles, metal roofing and tile roofing.
  • Commercial and low-slope buildings: for property owners evaluating flat-roof assemblies, TPO, EPDM, modified bitumen and applicable metal systems.
  • Restore an existing roof: for qualifying roofs that may benefit from a coating or restoration system instead of immediate replacement.

Steep-slope roofing systems

Systems that shed water by gravity and are part of how the building looks from the street.

Steep-slope roofing

Asphalt shingles

The most common steep-slope system on homes and multi-family buildings. Architectural profiles add depth; impact-rated and high-wind lines are available. What to weigh: appearance, wind rating, impact resistance and warranty.

Tile roofing

Tile roofing

Clay and concrete tile for homes framed to carry the load. The tile is durable; the underlayment beneath it does most of the waterproofing. What to weigh: structural weight, underlayment, breakage and architectural appearance.

Metal roofing

Metal roofing

Standing seam and exposed-fastener panels for homes, metal buildings and some low-slope commercial roofs. What to weigh: panel profile, fastening method, finish coating, thermal expansion and lifecycle.

Flat and low-slope roofing systems

Flat roofing is a roof configuration, not one material. Depending on the building and the existing roof, a low-slope assembly may use TPO, EPDM, modified bitumen, metal or another approved system. Drainage, penetrations and the complete assembly matter as much as the membrane.

TPO roofing

TPO roofing

A reflective single-ply membrane with heat-welded seams, common on warehouses, retail and offices. What to weigh: membrane thickness, attachment, seams and insulation.

Modified bitumen

Modified bitumen roofing

A multi-layer, asphalt-based system for commercial and multi-family low-slope roofs. What to weigh: installation method, surfacing, seams and existing conditions.

Metal roofing

Commercial metal roofing

Structural panels for metal buildings and some low-slope commercial roofs. What to weigh: fastening, expansion, coating and detailing at transitions.

Roof coatings

Roof coatings

A fluid-applied layer over a qualifying existing roof, used to restore rather than replace. What to weigh: existing moisture, adhesion and drainage.

Roof coatings

Restore a qualifying roof, not every roof

A roof coating is a fluid-applied layer (silicone, acrylic or another elastomeric product) applied over an existing roof that is still sound. It can add weatherproofing and reflectivity and extend service life. It is a restoration product, not a replacement for every roof system.

A coating is often a candidate when the insulation and deck are dry, the surface accepts adhesion, water drains without long ponding and damage is limited and repairable.

It is usually not appropriate when moisture is trapped in the assembly, the deck or insulation has failed, drainage problems need re-sloping or damage is widespread.

Coating is not automatically cheaper or faster than replacement. Eligibility comes from testing, not from the age of the roof.

Roofing systems compared

A starting point for what to look into next, not a specification. Cost and lifespan depend on the assembly, tear-off, manufacturer and maintenance, so we do not publish universal figures.

SystemCommon applicationRoof profilePrimary strengthsImportant considerations
Asphalt shinglesHomes and multi-familySteep slopeFamiliar appearance, broad optionsWind rating, impact rating, ventilation
MetalResidential and commercialSteep or low slopeDurability, varied profilesAttachment, expansion, coating and details
TileResidential and architectural propertiesSteep slopeAppearance and material durabilityWeight, underlayment and breakage
TPOCommercial buildingsLow slopeReflectivity and welded seamsThickness, attachment and puncture exposure
EPDMCommercial and low-slope buildingsLow slopeFlexibility and established useSeams, attachment and heat absorption
Modified bitumenCommercial and multi-familyLow slopeMulti-layer constructionInstallation method and surface condition
Roof coatingsQualifying existing roofsPrimarily low slopeRestoration and reflectivityExisting moisture, adhesion and drainage

Seven things we look at before naming a system

We do not recommend a roof we have not seen. These are the factors an assessment covers. See it in person before deciding.

01

Building and property type

Home, multi-family community, retail center, warehouse, church or other facility.

02

Roof slope and geometry

Slope determines which systems and installation methods are appropriate.

03

Existing assembly and condition

Decking, insulation, moisture, prior layers and structural support.

04

Gulf Coast exposure

Heat, UV, humidity, heavy rain, high winds and tropical weather shape detailing and product choice.

05

Appearance and property rules

Architecture, HOA restrictions and visible roof areas.

06

Lifecycle priorities

Initial investment, maintenance, repairability, energy performance and how long you will own it.

07

Warranty requirements

Coverage depends on the complete assembly, approved products, installation and upkeep.

Services available across roofing systems

System pages explain the materials. Service pages explain what we do. A system page covers the material; our repair and replacement pages cover how we diagnose and fix problems across every system.

We're trusted by our clients

★ 4.9 average · 1,400+ Google reviews

Jacob Kempnich
Jacob Kempnich
★★★★★
We just had our roof replaced by M&M Roofing in Clearlake and were very pleased with their work. Michael McCollom did a great job of explaining everything to us beforehand, including discussing options and plans, the pricing and scope was very fair and reasonable. Once we signed the contract for the work, he communicated with us promptly about dates and expectations. The crew showed up and they were extremely fast and efficient. The roof looks great, and we couldn't be happier. We highly recommend M&M Roofing Siding & Windows.
Steve Hargis
Steve Hargis
★★★★★
We had M&M come out to repair a couple of leaks in our covered patio. Greg was super helpful in diagnosing the issues, providing lots of information on how best to make the repairs and options for what we needed.


The work was completed in one day and Greg came out to make sure the crew was doing everything the way he wanted. The whole process was really great. Very professional from start to finish. Thanks M&M.
Cassandra Lazos
Cassandra Lazos
★★★★★
I recently had the pleasure of working with M&M for siding work on my house, and I must say, the experience exceeded all my expectations. From the get-go, the level of customer service was simply outstanding. A special shoutout to Sam, our representative, who was not only professional and knowledgeable but also incredibly attentive to our needs.

Sam went above and beyond to ensure that all our questions were answered, and our concerns addressed, making the entire process smooth and stress-free.
Rachel Maddoux
Rachel Maddoux
★★★★★
Tim did a great job. He picked out tile that exactly matched my roof. I only had to replace a portion of …
Brittney Richard
Brittney Richard
★★★★★
I cannot say enough good things about this roofing company! From start to finish, the entire experien…
Sam Trujillo
Sam Trujillo
★★★★★
Chris P. was prompt and knowledgeable about his product and shared wonderful insight as t…
Keith Blackford
Keith Blackford
★★★★★
Honest, professional, easy to deal with! Highly recommend.
Bill G
Bill G
★★★★★
Replaced our mid-1980s residential siding with a major-branded cement-fiber product in August…
Charlotte Childress
Charlotte Childress
★★★★★
M&M has been there for me through a new roof, siding, and gutters… they are professionals th…
Jingting Yang
Jingting Yang
★★★★★
We recently replaced our 20-year-old roof using M&M Roofing, and we couldn’t be happier with our…

Roofing systems FAQs

On steep-slope roofs: asphalt shingles, tile and metal. On low-slope roofs: TPO, modified bitumen, metal and other approved assemblies. We also restore qualifying roofs with coatings.

It comes down to slope, building use, the existing assembly, local exposure, appearance requirements and how long you plan to own the property. An on-site assessment is the reliable way to narrow it down. We will not name a system without seeing the roof.

Steep-slope roofs shed water with overlapping materials like shingles, tile or metal panels. "Flat" roofs are actually low-slope and rely on a continuous membrane or multi-layer assembly plus drainage.

Both, with different profiles. Homes often use standing seam or metal shingles; metal buildings and some low-slope commercial roofs use structural panels. Fastening, expansion and detailing change with the application.

Sometimes. A coating needs a dry assembly, a surface it can bond to, workable drainage and limited damage. We test for moisture and adhesion first and tell you plainly if replacement is the better call.

Yes. Most repair and maintenance work we do is on roofs someone else installed. We will note anything that could affect an existing manufacturer warranty before we start.

Get a system recommendation for your property

Tell us what you have and what is going on. We will schedule an assessment and recommend a system after we have seen the roof, not from a dropdown.

★ 4.91,400+ Google reviews20,000+ roofs replaced